Ice Machine Filter Systems

Roughly 70% of service calls on ice machines are water related.

The most frequent water related problem associated with ice machines is lime scale accumulation.

EFFECTIVE WATER FILTRATION PROVIDES THE FOLLOWING:

Mineral scale build up responsible for increased maintenance is reduced.

Sediment that causes cloudy ice that plugs distribution tubes & float valves is removed.

Energy efficiency and ice machine life are increased while reducing costly service calls.

Chlorine taste and odor is removed (for carbon based systems) reducing potential corrosion issues.

SFES PRO Water Filter Systems for ice machines are offered with 3 separate filter options in 2 sizes (10” and 16” cartridge lengths.. All of these are combined with the patented ScaleStick Insert Plug providing unparalleled mineral scale control.

SFES PRO SDS

The SDS filter systems provide sediment filtration w/ scale control. The 5 micron melt blown sediment filters allow for chlorine to pass through the systems helping control bacterial growth inside the ice machines where this is an issue.

SFES PRO TOS

The TOS filter systems provide chlorine removal w/ scale control utilizing standard carbon block technology that removes sediment and chlorine from the water supply improving the taste of the water and reducing possible chlorine related corrosion issues.

SFES PRO TOSF

The TOSF filter systems utilizes a special filter that removes both sediment and chlorine but has a higher sediment loading capacity and reduced chlorine removal capacity. This is a premium product that is mostly used where the standard TOS filter plugs prematurely from excess sediment in the water supply or where lower pressure drop is important for equipment operation.

SFES PRO QUICK DISCONNECT/
BAYONET MOUNT CARTRIDGES

Filter cartridges are installed or removed with a 1/4 turn of the filter allowing for quick and sanitary filter changes never exposing filter internals to possible contamination.

Sizing Guide

For correct system sizing, please refer to the water flow requirements of the ice machine. Water flow requirements will vary from one manufacturer to the next on the same sized machine. Variations in water quality or pressure may reduce overall water flow especially as filters are in service for prolonged periods.

SFES PRO Ice Machine Filters provide excellent sediment filtration, chlorine removal and mineral scale control. The gallon capacity ratings of the filters are based solely on chlorine removal and not scale control. Recommended filter change interval is 6 months based on the useful life of the scale control component.