HyrdroBlend ScaleStick
ScaleStick is a special HydroBlend feed system developed to be used with standard filter head & housings.
HydroBlend Feed System Using

ScaleStick Feed System Using
Standard Prefilter Head

Where standard HydroBlend systems utilize flow-thru medial deliver heads, the ScaleStick based systems use standard filter heads to dispense the product.
ScaleStick cartridges fit standard 10″ filter housings allowing them to be used with any number of standard housings that accept 10 filter cartridges in new or existing applications. If sediment filtration or carbon block filtration is desired in the same housing, there are a couple of choices – The SS-IP or the SS-DI.
The SS-IP is an insert plug inside the bottom cap of a sediment filter (SD-510SS, SD-516SS, or SS-20SS) or a carbon block filter (CB-10SS, CB-16SS, and CB-20SS). These plugs are not replaceable and must be ordered as a complete filter cartridge with the SS-IP included.
The SS-DI Short/Tall is inserted into the top of most carbon block filters or sediment filters and can be removed to check product levels. It is order separate from the sediment filter or carbon block filter.
Use of the SS-IP or the SS-DI is usually limited to Point-Of-Use applications like ice machines or coffee equipment. Point of entry applications always use a stand alone ScaleStick in the proper size for the given flow rate of the application.
The ScaleStick water treatment line includes a variety of cartridge configurations allowing their use in many different water treatment applications. The ScaleStick feed system can be tailored to meet various equipment or user demands including flow rates, frequency of use, and desired treatment duration.
Standard ScaleStick Systems utilize drop-in style housings where the same housing is used and cartridges are exchanged periodically. These are available in Single or Twin Housings. Twin systems are offered with Sediment or Carbon Block Filters in housings that accept 10″ 16″ or 20″ filters.
ScaleStick Cartridges
SS-10
(Standard ScaleStick)

The SS-10 ScaleStick is a stand alone cartridge that fits standard 10” water filter housings. It is typically used in foodservice applications, primarily on ice machines where the water usage is generally higher than on most other beverage equipment.
Preferred Flow Rate Range-1-2 gpm
Applications – Ice Machines, High Volume Coffee/Tea, Boiler Based Steamers & Combination Ovens, Proofers, Deck/Rack Ovens, RO Pretreatment, Misting Systems, Swamp Coolers
SS-XL
(Large ScaleStick)

The SS-XL ScaleStick is a stand alone cartridge that fits standard 10” water filter housings. It is typically used in foodservice and tankless water heaters applications.
Preferred Flow Rate Range-1-3 gpm
Applications – Large Ice Machines, Multiple Coffee/Tea Equipment, Warewash Equipment, Small Tankless Heaters, RO Pretreatment, Misting Systems
SS-EXT
(Extra Large ScaleStick)

The SS-EXT ScaleStick is designed for some foodservice, residential, and light commercial applications. Its larger diameter makes it suitable for medium size ware wash applications and some POE installations in small establishments. Residential applications include whole house water treatment.
Preferred Flow Rate Range- 2-4 gpm
Applications – Warewash, Whole Home or Small Restaurant, RO Pretreatment, Tankless Water Heaters
SS-MAX
(Extra Large Tall ScaleStick)

The SS-MAX ScaleStick is a longer version of the SS-EXT that was designed for the same foodservice and light commercial applications. Its sizer makes it suitable for higher demand ware wash applications and some POE installations. Its feed rate is similar to that for the SS-EXT, however the length of the cartridge allows for longer treatment periods in between cartridge replacements.
Preferred Flow Rate Range- 2-6 gpm
Applications – Flight Type or high usage Warewash, POE applications, RO Pretreatment, Tankless Water Heaters
Although all ScaleStick cartridges allow water to flow at much higher flow rates than their preferred flow rate range, choosing the correct cartridge for the specific application will ensure proper feed rates and treatment duration. The preferred flow rate range is the average flow rate encountered in a specific application. For example, even though a household may occasionally flow 10 gpm if enough faucets or appliances are being used, the typical average flow in a residential application is one faucet on at a time or 1-3 gpm depending on the outlet. All applications are sized for the average flow rate encountered, not peak flow rates.
ScaleStick Systems

PF-10-SS
Standard Filter Housing with SS-10
PF-10-SSXL
Standard Filter Housing with SS-XL
PF-10-SSEXT
Standard Filter Housing with SS-EXT
PF-10-SSMAX
Standard Filter Housing with SS-MAX
ScaleStick System for Warewash

HBW-SSXL
High-Temp Filter Housing with SS-XL
HBW-SSEXT
High-Temp Filter Housing with SS-EXT
HBW-SSMAX
High-Temp Filter Housing with SS-MAX
Twin ScaleStick System

FA-SS-SD-TW
Twin ScaleStick System w/ Sediment Pre-filter
FA-SS-CB-TW
Twin ScaleStick System w/ Carbon Block Pre-filter
DESCRIPTION
Twin ScaleStick System comes complete with twin mounting bracket ,ball valves & filter wrench. Pre-filtration flexibility and higher loading capacities.
APPLICATION
Moderate flow rate & volume applications (.5-2 gpm). Individual steamer or combi-oven where usage is 6 hours plus per day. Multiple coffee, espresso, & tea machines. Hot water dispensers, bread proofers, & ice machines under 800 lbs.
Twin ScaleStick System with twin mounting bracket

FA-SS-SD-TW-20
Twin ScaleStick System w/ 20″ Sediment Pre-filter
FA-SS-CB-TW-20
Twin ScaleStick System w/ 20″ Carbon Block
DESCRIPTION
Twin ScaleStick System comes complete with twin mounting bracket, ball valve, & filter wrench. Pre-filtration flexibility and higher loading capacities.
APPLICATION
High flow rate & volume applications (2-4 gpm). Steamer or combi-oven where usage is 6 hours plus per day. Multiple coffee, espresso, & tea machines. Hot water dispensers, bread proofers, & ice machines under 1600 lbs.