Water / Soda / Juice Beverage Filter System
Beverage Filter Systems
Great tasting drinking water and beverages tells your customers that you care about quality.
The main ingredient in a fountain beverage is water, so assuring consistent water quality is critical. Removing chlorine and chloramine provides a better tasting carbonated beverages and reduces extra syrup normally added to the drink to mask the chlorine taste and odor.
HIGH QUALITY FILTERED WATER DELIVERS:
Reduced Cost Since Costly Overcompensation of Syrup Not Needed to Mask Chlorine.
A Consistent High Quality Great Tasting Beverage.
Higher Beverage Carbonation Increasing Effervescence Helping Eliminate Flat Drinks.
Chlorine and Chloramine Removal
Standard beverage systems combine roughly 4 parts of carbonated water to 1 part syrup concentrate (bag in boxes) to form a carbonated beverage. These traditional post mix systems usually only requires the removal of chlorine from the water supply. For sediment and chlorine removal the TO cartridges are recommended. Newer beverage systems that use a much high percentage of carbonated water and a more concentrated syrup component requires the removal of chloramine as well as chlorine when present in the water supply. For sediment, chlorine and chloramine removal, the TOC cartridges are recommended.
SFES PRO Water Filter Systems for drinking water, soda, and juice systems are offered with 3 separate filter options in 2 sizes (10” and 16” cartridge lengths..
SFES PRO TO
The TO filter systems utilize standard carbon block technology that removes sediment and chlorine from the water supply improving the taste of the drinking water, soda, and juice beverages.
SFES PRO TOC
The TOC filter systems utilize a catalytic carbon block technology that removes sediment, chlorine and chloramine from the water supply improving the taste of the drinking water, soda, and juice beverages.
SFES PRO TOF
The TOF filter systems utilizes a special filter that removes both sediment and chlorine but has a higher sediment loading capacity and reduced chlorine removal capacity. This is a premium product that is mostly used where the standard TO filter plugs prematurely from excess sediment in the water supply or where lower pressure drop is important for equipment operation.
SFES PRO QUICK DISCONNECT/
BAYONET MOUNT CARTRIDGES
Filter cartridges are installed or removed with a 1/4 turn of the filter allowing for quick and sanitary filter changes never exposing filter internals to possible contamination.
Sizing Guide
For correct system sizing, please refer to the water flow requirements of the equipment. Variations in water quality or pressure may reduce overall water flow especially as filters are in service for prolonged periods. For soda system applications, size based on 2 gpm per carbonator.
SFES PRO Beverage Filters provide excellent sediment filtration, chlorine and chloramine removal. Recommended filter change interval is 6 months based.